How to Change and Sharpen Your Husqvarna Lawn Mower Blades
It is the time of year when your blades are starting to wear out. This might cause you to have trouble getting the neat, clean cuts that you are used to getting. In this article, I’ll explain everything that you need to know about changing your lawn mower blades and sharpening them before using them again.
The following tips will help you identify mower blade problems and how know when it is time to replace your mower blades. If you continue reading, I will try my very best to answer any questions you may have about Husqvarna blades.
A leading manufacturer of lawnmowers, Husqvarna is one of the most popular names when it comes to lawnmower lawnmowers.l cutting blade riding mowers made by this company prove to be extremely popular with a wide range of customers. Omers are durable and suitable for both large and small yards. Despite the fact that expensive lawnmowers also require regular maintenance, as does any lawnmower. The blades of Husqvarna lawnmowers must be in proper condition for them to function so that the mower will perform at its peak. The blades on Husqvarna lawnmowers are always sharp and in excellent condition. However, after some months of use, the blades of the grass cutter become dull, which results in the grass being cut poorly. It can result in an ugly lawn and even result in a rash of grass diseases if you do this.
How to Change and Sharpen Your Husqvarna Lawn Mower Blades
There should be a change of lawn mower blades on Husqvarna lawn mowers at least once a year. In addition to premature dulling and dinging your blades, blades that are exposed to sand, gravel, and rocks for quite some time may also require more frequent sharpening.
It is extremely helpful to check your mower blades periodically. This is because mowing conditions can vary from yard to yard, and it is imperative to make sure that they are up to date.
Thin How to Change and Sharpen Your Husqvarna Lawn Mower Blades.
How To Remove & Replace The Blade
As soon as you have removed the blade, you should inspect it to see if there are any damages. If the blade shows any signs of damage, such as cracks or dents, do not use it until it has been replaced. Start sharpening the blade at the heavier end of the blade and do a little bit at a time. Make sure to grind evenly across the face of the blade until it is balanced. Make sure that you do not grind your knives to knifepoint and that you allow for a 1mm edge on them when sharpening them.
As a new blade is being installed, you will want to make sure that the cutting edge of the blade is facing the direction of rotation when it is installed. On each blade, you will find an embossed message that says “This way up”. You should ensure that the writing of the title on the mandrel is pointing in the direction of the deck. In addition, you should ensure that the star on the mandrel is aligned perfectly with the center hole on the mower blade. Once the blade has been fitted and tightened into position, make sure you have checked the balance of the blade one more time. When a blade is unbalanced, intense vibrations can be induced which can lead to damage to the mower deck and motor if the mower blade is left unbalanced.
Here is how you can check the blade’s condition:
You can tell whether your Husqvarna riding mower blades are in proper condition by inspecting either the grass up close or by inspecting the blades themselves. Both of these tasks should be done regularly, and we recommend that you do so.
Fine and healthy grass blades can withstand the toughness of grass and cut it cleanly and evenly. When the mower height is not changed during a pass by the mower, the grass length is automatically mowed to the same length with each pass by the mower. This is so long as the mower height is kept constant. In the meantime, if some lawn patches have more grass cut than others, it means that the grass is not being mowed evenly. This might suggest that the blades are dull and damaged because of their age.
It is always advisable to check the blades on the mower before you park it in your garage. If you were to judge a blade’s condition by looking at it visually, it would be sufficient. When you are inspecting blades, some factors to consider are the sharpness of the blade, the thickness of the cutting edge, and the quality of the blade surface. Aside from that, you should consider dentists or dentures. Sharp blades tend to be more cutting-edge. This is definitely one of the benefits of sharp blades. This can be felt by gently touching it with the tip of your index finger after it has been sharpened. The most effective way to recognize a sharp blade is to move your finger over it with extreme caution. If the blades are too thin, there might be a There should be no visible chips or dents on the blade surface. Files can be used to smooth out blades with light chips, but you must replace blades that are chipped or twist those that are damaged. When using thin blades with cracks on them, it is possible for them to break off during operation. This can result in serious injury to the machine or the person working on it.
Poorly made blades can have the following negative effects:
There is no doubt that the goal when you purchase a Husqvarna riding mower is to have an eye-catching and healthy lawn. No matter how badly a damaged blade cuts grass, a damaged blade will ruin your plan. There are a number of problems that arise when blades are faulty, including:
Faulty blades not only lead to an ugly appearance on your lawn, but they can also do damage to it. By the way, there is a reason for this: dull blades rip grass edges instead of cutting cleanly and evenly. When grass tips are roughly torn, the grass turns brown much quicker, giving the lawn an unwanted look, and making it look unsightly.
The spread of grass diseases and fungal growth can be caused by dirt that is not properly cut and is not kept clean.
It will increase fuel consumption: Blades with dull and damaged edges consume more fuel than those with sharp edges. This, means if you cut your lawn with faulty blades, you will consume more engine power and increase the cost to cut your lawn
Blocking/Securing the blades
After you have finished cleaning the blade, it would be a smart idea to secure it in place. This will ensure that it does not move while you are trying to put a refinished edge on it while it is being cleaned. Assuming that you have a blade lock tool that is specialized for this purpose, that is very helpful. However, if you do not have one, then you can always do this with a block of wood or a set of locking pliers. In order to stop the blade from turning, you’ll have to either lock the pliers onto the mower deck’s side or wedge a piece of scrap wood between the blade and the side.
People who sharpen their blades with a drill or angle grinder may hold the blade with one hand as they sharpen it with the other, but this is dangerous. Additionally, if you try to hone your blade with one hand, it is a lot more difficult to get the right angle.
Are the blades sharpened or replaced?
Sometimes it’s not necessary to sharpen your lawn mower’s blade because it’s due for a replacement. Lawn mower blades don’t have a certain lifespan, but they should generally be changed every two to three seasons. If this is the case for you, make sure it is checked. You probably need to replace your blade if it is bent, has large nicks/dents, or is heavily corroded. It can save you time and money to know when to replace lawn mower blades.
Husqvarna Mower Blade Removal
Use sockets and ratchets to remove your mower blades. If they don’t come off easily, you might need to use an impact gun.
Placing a block of wood over the head of stubborn bolts can also help you remove them. To turn the bolt, you will have to loosen the block with a hammer.
Take off the bolt, blade, and washers that your blade may be using. Reinstall your blades and parts in the opposite order you removed them. When reusing blades, make sure they are balanced before reinstalling.
Mower blade balance for Husqvarnas
All Husqvarna blades that we purchased recently have been balanced and are ready for installation on your mower. After sharpening your blades, ensure they are balanced.
The weight of your blade should be equal on both sides. If the blade is heavy on the heavy side, shave more metal off the heavy side to even out the weight.
A nail on the wall that sits about an inch from the wall can also be used to check the balance of the blade.
Over the nail, place the blade’s center hole and check whether the blade hangs lower on the right or left side. In order to enable the blade to sit flat on the nail, you will have to remove more metal from the side that hangs lower.
Conclusion:
You need to replace your Husqvarna riding mower blades after sharpening them several times. Additionally, hitting a rock or other debris may cause the blades to become damaged. This may require replacement. Having dull blades can lead to all kinds of problems with your lawnmower and lawn. You can replace your old blade very easily, but make sure you use the right blade and take care not to injure yourself when you do so How to Change and Sharpen Your Husqvarna Lawn Mower Blades.
