How to Change & Sharpen Bad Boy Lawn Mower Blades
A sharp lawn mower blade gives you the cleanest cuts, so be sure to sharpen it several times throughout the season. The lawn mower blade can be removed by yourself, so it’s worth learning.
For maximum results, first remove your change & sharpen bad boy lawn mower blades and then sharpen them and balance them while they are off the mower. There are however some mowers whose blades cannot be removed by the property owner. It is possible that it is due to a lack of tools, excess rust or a lack of time, or it could be due to a lack of energy.
Here you will find all the information you need about taking care of your Bad Boy that you want to know. It is a guide that includes information for checking for a damaged blade, sharpening it, and balancing it if the blade is damaged.
To prevent your mower from starting, you should remove the spark plug wires and ignition key before you start the mower in order to be safe. When you are attempting to access the bottom of your mower deck, you need to be cautious.
How Often Should Change & Sharpen Bad Boy Lawn Mower Blades
You should replace your mower blades at least once a year if you are an average homeowner. There is a recommendation that Bad Boy lawn mower blades need to be changed every year. The blades of the mower should be changed more often if they are exposed to dirt and gravel.
If you find that they have become damaged, you may also consider replacing them. If you would like a more detailed answer, you might want to take a look at that product manual. When sharpening your mower blades at home, make sure to always take the necessary precautions to keep yourself safe.
Bad Boy Mower Blades: How Often Should They Be Sharpened?
After approximately 25 hours of use, you should file your lawnmower blades. Having your blades sharpened once a year is a smart idea if you spend approximately half an hour a week mowing your lawn. Your lawn maintenance plan should include sharpening mower blades.
Is it necessary to sharpen the blades of new Bad Boy Mowers?
Sharpening is not required before using the updated Bad Boy mower blades. The manufacturing process involves sharpening mower blades. Afterwards, the edge of the blade is painted with paint. Using this paint on your mower wears it from the edge.
The Best Way to Change a Bad Boy Mower’s Blades
Then here’s what you need to know about changing the blades on a bad boy mower. You can change this by following the steps in this report. The following steps will help you to complete the process:
Make sure the mower blades are in good condition
Whenever you sharpen blades that are not severely worn, but dull, you must ensure that they are sharp enough for the next use. Nevertheless, if you find that the airfoil built into the back of the blade has been worn away, bent, or damaged in any way, it’s time to replace the blade.
Spark plugs should be unplugged before starting the engine
To be on the safe side, you need to be aware of electrical flare-ups, short-outs, and other electrical problems. The mower should be held properly if any oil or gas comes into contact with the spark plug, which may cause the spark plug to fail.
The blade of a Bad Boy mower is bent
There is a possibility that the blade on your Bad Boy mower is bent if your mower doesn’t cut as well as it once did. When mowing, hitting sharp objects like rocks or tree roots can cause this to happen.
Wear gloves and remove spark plug wires before performing any work under your mower’s deck. The following methods can be used to check for bent blades:
Bad Boy blades can be bent by removing them:
Check the blade on your Bad Boy mower for bends by removing it. Check the spindle case for damage by grabbing the blade ends. You can test if there is any knocking sound coming from inside the housing by moving the blade back and forth and seeing if there is any movement happening.
Please replace the spindle housing as soon as the spindle housing detects any damage. It may happen if you strike a sharp object while mowing, so you should be careful when doing so. Let us conclude by comparing the updated mower blade and the old one.
Blade Sail worn by Bad Boy
Look at the sail on the mower blade if you want to know what it is. There is a term called sail that refers to the side of the blade that is higher. As a result of the sail, air is created under the mower deck in an attempt to assist in the flow of air.
There is a lot of air movement as a result of the deck shell, as well as the baffles that are installed. This creates suction when the blade passes over the grass to give it a precise cut while the blade is pushing aside the grass.
Depending on how much dirt moves underneath the deck, the sail can wear out over time. As soon as the sail is no longer in good condition and the center of the blade is thinner than the outside of the sail, it is time to replace the blade.
Your Bad Boy Blade has chips and gouges
When a blade strikes a stone or other solid object, the blade edge can be nicked. A Bad Boy mower’s cut quality can be compromised by this. A sharpened blade can usually smooth out small chips. Replace blades that have been nicked and gouged severely.
The blade of a Bad Boy mower is cracked
Mower blades with cracks should be replaced immediately. The blade on your mower may break off and fly away if it spins at high speeds under the deck. Injuries or property damage can result as a result of this.
Blade replacements are available
When the blades are worn out, it is a smart idea to replace them. Depending on how the mower is designed, it may have two short separate modules at the bottom, while others might have a longer blade, which resembles a ruler.
Identify the type of blade your mower needs at the hardware store by tilting the mower back and inspecting the blade. A manual for the vehicle can also be found in the owner’s manual.
If the blades seem to be in decent shape, keep them and sharpen them. Replace yours if yours is worn out, chipped, or has chunks missing from the surface.
Replace the blades with the new ones
If the blades fit upside down, you must install them right side up. Offset edges have a higher center position than their ends if the center is offset. In order to prevent damage when the nut secures the tightening, make sure the blade fits on the spline.
Make sure all nuts are tight
The new edge must be secured by tightening the nuts. As soon as you park your mower for work, take a look at the belts, pulleys, tensioner, and other components of the mower. Make sure they are working properly.
Needed items
- Blades new to the market
- Screwdrivers
- The mower is supported by a block
Suggestions
- The blades on your mower can be sharpened to make mowing faster and more efficient, as well as to extend their lives.
- Your mower’s blades will last longer if you keep your lawn clean.
- You will get a much longer lifespan if you keep your new edge sharp.
- There is often a significant difference in the cost and quality of market blades compared to those of the original manufacturer.
- There must be an unplugging of the spark plugs.
Your Bad Boy Blade Needs Sharpening
To keep your grass looking tidy, you need to sharpen the blades of your Bad Boy lawn mower regularly.
Equipment must be gathered
Let us speak about what you’ll need to sharpen lawn mower blades without removing them first before we get started talking about how to sharpen them without taking your mower apart. Luckily, most of the materials needed to complete this project are readily available:
- Gloves that resist cuts.
- Protection for the eyes.
- The deck and blade of the mower should be cleaned off with a wire brush, a putty knife, a prybar, and another scraper.
- For bracing the mower, you will need a few scraps of wood.
- Files, angle grinders, or drills (with grinding attachments).
It is a good idea to start by gathering some of your equipment. Then, setup your mower on your workbench or on the floor so that you can kneel and work on it.
Power supply should be disconnected
Ensure that your lawn mower has been disconnected from the power source before you continue. The battery must be removed from electric mowers or the cord must be unplugged. Taking the spark plug hood off your gas mower is all it takes. You can prevent unexpected starts by doing this.
The Bad Boy Blade needs to be cleaned
Make sure you wear safety glasses and work gloves. Make sure your mower blades are clean by using a rag to wipe them down. If stubborn areas of buildup persist, use a wire brush.
Blades for Bad Boy Mowers
To prevent your Bad Boy blade from shifting during sharpening, secure it in a vice. The blade will need to be flipped after sharpening one side and secured in a vice while grinding the other side.
Overturn the lawnmower
The blade of your mower can be accessed by tipping it on its side after you’ve positioned it where you want it. The importance of this step cannot be overstated. The right way to tilt your mower isn’t obvious to many people.
The air filter and carburetor should be facing up when you tip your mower over. The purpose of this is to prevent gas and oil from leaking from their reservoirs and contaminating other areas.
Support/brace for mowers
You’ll want to make sure that your mower does not fall when you flip it on its side. As long as it can support the mower adequately, I prefer to use scrap 2 x 4 pieces of wood I have lying around. When lawnmowers are on their sides, they won’t move, but you can set up extra support if you want to make sure they stay put.
To sharpen a Bad Boy Blade, file or grind the edge
Metal files can be used to sharpen
- Put a file in one direction along the blade while pushing it at an angle.
- The filing motion should not be sawed.
- Sharpen the blade from the other side after removing all rough spots and uneven edges.
Blade sharpeners powered by drills can be used to sharpen blades.
- Attach the blade sharpener to the drill and turn it on.
- With the cutting-edge slot into the bevel, align the flat guide of the sharpener on the flat portion of the blade.
- Sharpen the blade edge by moving the sharpener up and down.
- Using the same method, sharpen the blade on the opposite side once it has been sharpened on the first side.
Using a bench grinder or angle grinder
- When you use an angle grinder, make sure that you hold it perpendicular to the blade edge. To level out any rough spots or nicks on the blade, run the grinder along the length of the blade. As long as the grinder is moving steadily, a small amount of metal can be removed at a time and a uniform result will be produced.
- In order to sharpen another side of the blade, flip it over, secure it in the vice, and sharpen it in the same manner you did for the sharpening of the first side.
In Summary/Conclusion
You can expect your lawn mower to last for many years to come. To make sure that you have a professionally mowed lawn every time, you will need to replace these frequently.
In order to maintain the sharpness, sleekness, ergonomics, and high-quality of your mower’s blades, it is quite easy to replace them. Hopefully the information in this article will assist you in changing and sharpening the blades on your Bad Boy Lawn Mower.
In this guide, we will give you all the steps you need to follow so you can change & sharpen bad boy lawn mower blades. In addition, we will sharpen them as well.
