Your Bad or Uneven Exmark Mower Cut Solved!

Exmark’s mowers are known for their durability and reliability, making them a popular lawn care brand. Although Exmark mowers are durable, like any other mechanical device, they can also suffer from problems that can affect the way they operate.

There are a variety of factors that can contribute to uneven cutting. These include wear and tear on the mower blades, improper adjustment of the cutting height, and irregular terrain all of which can create an uneven cutting surface.

There are many reasons why your lawn may not look as good as it should due to uneven cutting. We will discuss some of these causes in this article, along with steps you can take to fix the issue and make your lawn look its finest once again.

Causes of Uneven Cutting with an Exmark Mower Cuts

Exmark mowers are prone to uneven cutting because of a number of potential causes. Some of these causes are more common than others, and some are less likely to occur. If you have an uneven lawn cut, there may be several factors contributing to it. Here are some things you may want to consider:

Mower blades that are worn or damaged

Wear and tear on mower blades is a major cause of uneven cutting, and is one of the most common reasons why it occurs. The blades of lawnmowers can become dull and bent over time, which can cause the blades to cut unevenly as a consequence. As a result of damaged blades, the grass may not be able to be mowed evenly, resulting in a patchy appearance due to a lack of even cutting.

Height of cutting incorrect

Incorrect adjustment of the cutting height can also result in uneven cutting. The mower may have difficulty cutting grass evenly if it is set too low, resulting in patchy grass. A mower may, on the other hand, miss some areas of the lawn altogether if the blade height is set too high. This will lead to uneven grass growth in some areas.

Terrain that is uneven

A mower from Exmark can also produce uneven cutting due to uneven terrain. Mowers may have difficulty maintaining a uniform cutting height on sloped or bumpy surfaces, resulting in patchy lawns.

The deck of the mower is clogged

Uneven cutting can also be caused by a clogged mower deck. The mower’s ability to cut evenly can be affected by clogged grass clippings or debris on the deck.

Sharpening blades incorrectly

The incorrect sharpening of blades may also contribute to uneven cutting. It is important to make sure that the blades are sharped properly in order to prevent patchy areas on the lawn which may result from improper sharpening.

Bearings in the Spindle Housing are worn or bent

In your spindle housing, check for bent spindles or failed bearings that could cause your faulty cut. When you have your heavy gloves on, grab both sides of the blade and rock both sides up and down while holding them tightly between your hands. The blade can be felt if it makes a knocking noise and you hear a knocking noise when you listen for it.

If you hear knocking or notice movement in the spindle housing of your Exmark, then you should remove it and inspect it for damage. You are most likely experiencing a problem with your spindle bearing.

There are a few causes of a blade sitting unlevel, such as a worn bearing or spindle, which can result in a small space between the blade tips. When you use your Exmark to cut through this space, you will get an uneven cut.

A faulty deck belt or a worn pulley on a mower

If you have a worn or loose deck belt on your Exmark mower and it fails to move around the pulleys on your Exmark machine, it can make it impossible for the blades to move at high speeds. As well as damaged pulleys, this problem can also be caused by worn bearings.

The deck belt should be inspected for signs of wear such as a shiny glazed appearance, fraying or cracks, and checked for signs of deterioration. An Exmark belt that has worn out needs to be replaced. In order to ensure that I have a high-quality belt on my Exmark, I only use OEM belts, because I want to make sure that I do not hinder the performance of my deck by using anything but OEM belts.

Make sure that your pulleys are moving smoothly by hand spinning them to make sure you do not have any problems. You need to replace the pulley if at any time you feel a restriction or there is a bearing noise coming from the pulley. The pulley needs to be changed. The pulley should be replaced if it is not flush with the deck and is not lying flat on the deck.

It is too fast for Exmark’s ground speed

In some cases, ground speed could be a contributing factor to uneven cutting on your Exmark mower if you notice that it is cutting unevenly. It is possible for the blades of the mower to skim across the grass as the mower travels too fast rather than cutting it evenly.

This is because the mower travels too fast. To solve this problem, try adjusting the ground speed of your lawnmower to a slower setting and see if it helps in improving the quality of the cut. There is also a possibility that there are other factors that may be causing uneven cutting of grass.

Among these factors are worn or damaged blades and uneven terrain. The best thing you can do for your lawn tractor is to make sure that any of these issues are addressed as needed. This will ensure that it operates as efficiently as possible.

Damaged deck shell on an Exmark mower

As the mower moves across the lawn, it distributes grass clippings evenly thanks to the outer casing that surrounds the blades. The blades can cut unevenly if the deck shell is damaged, resulting in patchy lawn patches.

The only way to resolve this issue would be to replace the damaged deck shell with a replacement one in order to resolve this issue. Professional lawn care technicians or Exmark dealers may be able to assist with this complex repair. If you want the highest performance from your mower, make sure that you only use genuine Exmark parts.

In Summary/Conclusion

Finally, it can be a frustrating and time-consuming situation when a lawn mower like the Exmark Mower Cuts Uneven. However, you can restore the health and appearance of your lawn by troubleshooting the potential causes and taking the necessary steps to fix them.

Incorrect mower blade sharpening, worn or damaged mower blades, uneven terrain, a clogged mower deck, and uneven terrain are some of the common causes of uneven cutting. There are several ways you can resolve the issue, such as replacing blades, adjusting the cutting height, adjusting the terrain, or sharpening the blades.

The Exmark mower can once again cut evenly and efficiently with a bit of patience and basic maintenance. Thank you for reading this article. I hope it was helpful. My best wishes to you!