Fix Your Exmark Mower Deck Problem
It is unfortunately too common for lawn mower owners to wait until their deck starts making noises or begins to smell like burnt rubber before they take a closer look at it. You can end up having to spend a lot of money on repairs if you do not take the time to inspect the mower deck before something like this occurs.
There are however a number of issues that users of this mower have to deal with, which can cause a lot of headaches. There are a number of issues with the machine, including a faulty blade, an overheating engine, and more. Several factors can cause this problem, such as a drained fuel tank, a clogged fuel filter, or worn-out blades, which can be the cause of this problem.
In this article, I will walk you through what to look for in order to ensure that the Exmark mower deck is in good condition.
How to fix deck Exmark lawn mower deck problems
The first step in dealing with Exmark lawn mower deck problems is to address the simpler issues before moving on to the more complex ones. In addition to zero-turn mowers, Exmark also offers walk-behind and stand-on mowers.
A level deck is required for Exmark lawnmowers
It is important to perform a check on the deck height of your lawn mower if the tires have been set in accordance with manufacturer specifications. If you park your Exmark mower on a flat surface, you will be able to maintain its optimum performance.
Please make sure that the measurements of the mower deck are the same on all four corners of your mower deck before you proceed with the measurement. As a result, if they are not in accordance with the owner’s manual, you will need to make the necessary adjustments.
A trained dealer may find it a bit challenging to adjust the level of the deck. Sometimes it can take them up to two hours in order to get it right. You can ask your local Exmark dealer to make the adjustment for you if you have difficulty making it on your own.
The deck belts for Exmark mowers are worth checking out
There is no doubt that the blades, tires, deck level, and deck bearings on your Exmark are in good shape, but your yard still looks like a mess. The time has come for us to take a look at the Exmark deck belts and the pulleys on which the drive belts are mounted. The belts should be changed if the edges of them have a shiny or glazed appearance, or if they have a glazed appearance.
Maintenance of Exmark lawnmowers
In addition to taking the steps to maintain your Exmark deck, it is also important to ensure that the engine, transmission, and other components of the mower are maintained and protected so that the mower is able to continue to operate at peak performance for many years to come.
Tire pressure should be checked on Exmark mowers
The drive tires on your Exmark should be checked if you notice uneven cuts in the yard, and the blades are in good shape. On the rear of the mower, you’ll find the drive tires.
Check the manufacturer’s recommended tire pressure for your Exmark. Because one side of the mower deck sits higher than the other due to a soft tire, the mower deck may not sit level, resulting in uneven cutting.
PTO clutch for lawn mowers from Exmark
Manually disconnecting the engine from the blades is accomplished with the PTO clutch (Power Take Off). A clutch solenoid drives the lawn mower blades by engaging the drive belt when it is energized. A malfunctioning clutch solenoid or a worn clutch can prevent the lawn mower blades from engaging if the PTO clutch does not receive power. PTO clutches cannot be repaired; if defective, they must be replaced.
Your mower needs to be cleaned
Ensure that your unit is cleaned as often as possible, but try to use as little water as possible. There are many problems associated with water under pressure plus detergent. A pressure washer is a great device for cleaning, but it can also damage your equipment as it puts water and detergents into places that should not be exposed to water or chemicals. As much as possible, you should use compressed air or blowers to assist you. After using water in the unit, make sure that you grease and lubricate it afterward to prevent the unit from sticking.
Oil types and their uses
The quality of grease is more important than quantity. It is imperative to choose lubricants that meet your needs. In the end, a few cents saved by taking a shortcut here can really add up in the long run when it comes to your finances. The manufacturer of your engine may recommend a certain weight of oil depending on the time of year. This is in addition to the manufacturer of your engine’s recommended weight of oil. Oil consumption as well as the proper lubrication of the engine can be significantly affected by this change, as well as the amount of oil consumed. The engine should not be run with synthetic oil during the break-in period. It is still recommended not to use synthetic oil if you use synthetic oil; however, most engine manufacturers are against it. Lubrication of the engine is adequate when petroleum-based oil is used.
Mower blades need to be sharpened and balanced
It is important to maintain a sharp blade and balance the blade. Dieback and pests are more likely to occur on leaves with dull blades. Belts, bearings, and the engine are also put under more strain when a blade is dull. The cutting deck can be stressed and vibrated by an unbalanced blade. If the blades become damaged, replace them every 8 to 10 hours. It is inexpensive and easy to find blade-balancing tools. Make sure that you always keep an extra set of blades that are sharp and balanced with you.
The installation of a spring
Old starter ropes are helpful for removing and installing springs. You can make a loop at the handle of the old rope by taking it and wrapping it around. The rope should be slipped over the other end of the spring after it is attached to one side. A rope should be used to stretch the spring and attach the other anchor point.
