How To Change A Belt On An MTD Lawn Mower
We’ll show you how to change the belt on your MTD lawn mower quickly, easily, and efficiently so you can get back to your regular lawn care. You will also learn how to prevent your belt from slipping off and why it might be doing it Belt On An MTD Lawn Mower.
Drive belts on MTD Yardman riding mowers are standard maintenance procedures. In Yardman products, the belt should be changed every two years or more if it is heavily used.
Every day throughout the mowing season, check the belt for nicks and damage. When climbing hills, be aware of reductions in engine power caused by an aging belt.
Belt On An MTD Lawn Mower
Despite this guide working for most MTD lawnmowers, some steps may differ depending on your particular model, so please keep that in mind before we get into the step-by-step process.
The mower must have the stamp of any of these brands to be considered an MTD lawn mower.
There are so many types of lawnmowers within each of these sub-brands that you’ll want to make sure the parts, particularly the belt, match your mower. Purchase a duplicate belt by checking the product number on your old belt.
Belt type?
Those belts are belts! No way. A correct belt is crucial. Ill-fitting or incorrect belts cause endless trouble. The belt won’t last long due to throwing, vibrations, poor cutting, and poor collection. My customer fitted a belt that was so tight that it broke off the crankshaft. Ouch!
For lawnmowers, a standard V-type belt is usually used, although there are a number of different types. As well as AA belts, timed belts, and poly V belts, other belts may be used.
A polyester cord will work nicely with a basic belt, but it’s going to wear out quickly. For durability, Kevlar is the better choice. They are more expensive, but they last a lot longer. OEM belts must be used on some models, including John Deere and MTD.
OEM (Original Equipment Manufacturer) parts should only be installed. There is a lot of work involved in fitting a belt. Finding out that something isn’t working can be demoralizing when assembling
The Drive Belt on a Push MTD Lawn Mower
The traditional lawn mower is a push mower, especially for those who have smaller yards and minimal lawn care requirements. MTD models, though fewer in number, remain an extremely popular choice for belt-changing, so we will begin this guide with one of those belt On An MTD Lawn Mower,
The steps below will help you replace the drive on any MTD push lawn mower.
Check the temperature of your lawnmower
To begin with, make sure your lawn mower is at its optimal temperature.
When you take apart a traditional lawn mower, be aware of the dangers of fumes they might exude during the repair, since most are still fueled by gasoline.
You could also catch fire when you don’t take care because the muffler can ignite the vapors.
You must let your MTD lawn mower cool down before you remove it and change its belt. It is therefore recommended that you put it somewhere safe where it can cool down for 10-15 minutes if you have used it prior to changing the drive belt.
You will also prevent yourself from getting injured or damaging the lawn mower components by doing so.
Belts with Vs
This shape (wider at the top than at the bottom) is what gives V belts their name. Almost exclusively, they power grass tractors’ transmissions with power from lawn tractor engines. They can also be used to drive deck blades. Power is only transmitted from one side of the V belt.
There are different heights and widths of V belts, and they come in all different lengths, as well. The most common V belts used on mowers are the A and B types.
There are markings on every belt that identifies its type, and length, and you may also find part numbers on them. Unfortunately, the marks usually wear off over time, making it difficult to identify belts without them.
Belt with a timer
Unlike most mowers that have a simple deck belt setup, this guide covers one with a more complicated system. Demo mowers have two deck belts that drive the mowing deck.
Firstly, there is the main input belt, which is powered directly by the engine. Replace the belt easily and without removing the deck. Just a few plastic covers are needed.
Both blades are turned in time by the second belt, which is the output belt. By doing so, the cutting blades are able to overlap and catch the grass tufts you sometimes see near the middle of your cutting strip.
We must remove the deck from the mower in order to replace the output belt, also known as a toothed belt or a timed belt. There is no difficulty to it and it shouldn’t take more than an hour to complete.
An overview of the timing deck belt replacement procedure is provided in this guide. Similar decks can be found on most top decks. It’s more complicated than other deck belt setups, but it’s not too complicated. Here are the steps: remove the deck, inspect the belts, replace the belt, tension the belt, and adjust blade timing.
Remove and replace the old belt
You should be able to see the drive belt after you remove the top drive mount. Drive belts are attached to lawnmowers’ transmissions by belt keepers. Unhook them to remove them.
Replace the drive belt by pulling out the old belt and sliding the updated belt over the transmission pulley belt On An MTD Lawn Mower’
Remove the drive belt and other components
To complete this process, many different components need to be disconnected and removed, so store all of your nuts, bolts, and washers carefully.
Additionally, you should keep your lawn mower user manual on hand in case you need to refer to diagrams.
MTD riding lawnmowers have the ground drive belt wrapped around the engine pulley. You must remove the belt from the engine pulley and release it from the belt keepers.
Take off the front lift link support retaining pin and washer from below your engine pulley and store them safely. Next, detach the silver rod from the deck. Disconnect the left suspension arm from the mower frame after removing the FlipBelt On An MTD Lawn Mower.
