Changing And Sharpening Exmark Mower Blades

A dull blade can actually make your lawn more susceptible to disease and less able to withstand extreme weather conditions. You might be surprised to learn how much your lawn mower’s blade impacts your grass. Your grass will be in a plight when you experience prolonged dry spells or patches of heavy rain, rather than flourishing into a lush, green lawn as you’d like.

Keeping your lawn healthy and your mower functioning properly means sharpening your mower blades regularly. When you have dull blades on your lawn mower, you will not only have a difficult time mowing, but you will also have a poor lawn environment Changing And Sharpening Exmark Mower Blades.

Sharpening and replacing Exmark mower blades

You should sharpen Exmark mower blades after every 25 hours of use. It amounts to roughly twice a year for the average homeowner.

If you mow in dusty conditions or on lawns with gravel, your blades will wear down faster and will need to be sharpened more often. This is compared to lawns without these conditions.

You should balance your Exmark mower blades

If you sharpen your mower blades, you should balance them so that your mower doesn’t get damaged. The equivalent weight on each side of your mower blade defines balanced blades.

Having different weights on both sides of the blade can cause your Exmark to shake and possibly damage your spindle housing and engine.

A blade balancer can help you ensure equal weight on both sides. Not having your blades properly balanced can cause a large repair bill.

Until the blades are balanced, shave metal off the heavy side of the blades.

Try hitting a nail on the wall so that the nail head sits about an inch away from the wall to check the blade’s balance.

Observe whether the blade hangs lower on the right or left-hand side of the blade by placing the center hole over the nail. Remove more metal from the area where the blade hangs lower until it sits level

Are lawn mower blades sharpened often enough?

Each individual has different needs, so it depends on what they are looking for. The most effective thing to do is to do this every week. Many still find that two to four weeks is sufficient. In the end, it’s your own efforts that make the difference, not the tools!

A lawn mower blade needs to be sharpened after an average of zero to 2525 mowing hours (although more often won’t hurt!). You may want to sharpen them a little earlier, however, if you find yourself having difficulty mowing your lawn before this time frame expires. 

How to calculate when to sharpen blades

Is it possible to calculate the 25 hours between sharpening blades in exactly the same way? 

It’s simple, I’ll explain.

To measure how long it takes you to mow the lawn once, follow the steps below

I suggest that you simply set up a timer when you cut your lawn next time so you can see how long it takes you.

These days, smartphones make it easy to do this.

Second step: calculate the number of cuts necessary to reach 25 hours

It’s really easy to cut the lawn once you know how long it takes. 

It’s just like calculating the right amount of mulch. You just need to do the math!

Consider this example: You mow your lawn for an hour. If you have 25 cuts in a row, you need to sharpen your blades. Changing And Sharpening Exmark Mower Blades.

Sounds simple, right?

In general, sharpening your blades more often will help your lawn, but only to a certain extent. 

Several lawn care professionals sharpen their blades as often as twice a week

THERE SHOULD BE REGULAR MAINTENANCE

Regular maintenance is extremely critical for your vehicle. If you have your mower and mower accessories tuned up once a year by professionals who know how to fix them, you will get better results. If you follow these simple steps, your lawn mower can last you for a long time. 

Mowers with zero-turn blades and riding mowers include:

• It is very critical to replace the oil and oil filter, air filter, pre-air filter, spark plugs, and fuel filter on a regular basis.
• As well as cleaning the cooling fins of the engine, you should also clean the deck of the mower.
• Furthermore, inspect the deck belt, bearings, idlers, transmission belts, idlers, tire pressures, and charging system.
• A level mower deck and oiled grease fittings, as well as sharpened and balanced blades, are essential. 

Push mowers work like this:

• During the maintenance cycle of a push mower, oil, spark plugs, and air filters must be replaced.
• The cooling fins and mower deck should also be cleaned.
• To conclude, check the cables, self-propel, lubricate the machine, sharpen the blades, and balance the machine.

How a Professional Sharpener Can Help You

In spite of the fact that I can sharpen my own Exmark blades, I prefer to have my local Exmark dealer hone them professionally. Having the blades sharpened costs about $7-$10.

In addition to putting an edge on my blades, I always receive them balanced and ready to install from the dealership. There is no way I could do the job as well as they do.

I have to drop off my blades at my dealership to be sharpened and then pick them up two days later.

As long as I have a second set of sharpened blades on hand, this timeline works for me. Abrasion may be necessary for the following reasons:

• If you sharpen the blade yourself, it’s a safer option 
• It is often less expensive to sharpen a blade than to purchase a replacement one 
• Taking large nicks and gouges out of a mower blade can be done by a professional 
• A properly balanced blade will reduce vibration and damage to the mower deck. 

The Bottom Line on Sharpening Mower Blades

You don’t always need to sharpen your blades when you cut your grass, however, you may need to do it more often than you thought Changing And Sharpening Exmark Mower Blades.

For grass cutting, every 25 hours is a reasonable rule of thumb.  

Your lawn mower blade needs a neat, clean sharp edge for mowing… 

The lawn will thank you!