How to Service a Gravely Zero Turn Lawn Mower

Regular maintenance can prevent expensive repair expenses by catching small issues before they deteriorate How to Service a Gravely Zero Turn Lawn Mower.

Gravely zero turn mower service involves changing the engine oil and filter, replacing the air filter and fuel filter, cleaning around the engine, transmission, and mower deck, inspecting the belts, pulleys, and spindles, scraping the deck, sharpening the blades, checking the safety system, and changing transmission oil and filters if needed.

To ensure safety, read your Gravely operator’s manual before working on your mower.

The Gravely brand, which is a well-known brand, has served the tractor industry for many years. There are though some obvious problems and issues consumers face, which can sometimes be a bit technical. You might wonder how difficult that would be.

In the end, there is not much to worry about. In the article, I summarized some of the solutions I came up with. 

This post will cover some of the most common Gravely zero-turn hydraulic mower problems. 

How to Service a Gravely Zero Turn Lawn Mower

For zero-turn mowers, hydrostatic transmission poses a serious threat. In some circumstances, it is not quite so vicious if you spot it before the damage is done. 

This happens when air replaces oil. Engines cannot be powered by air instead of oil.

This is a general problem along the way. Before you can start a new season, it must be warmed up. 

Therefore, get it sorted out before the season starts off badly. 

To fix the transmission issue, I have explained some steps below

Gravely Zero Turn Mower Spark Plug Replacement

Depending on your engine model, remove your spark plug(s) with a 3/4″ or 5/8″ socket. It is recommended to replace the spark plug(s) with brand-new ones.

The purpose of replacing these annually during your Gravely service is to ensure that you do not have problems starting or running throughout the season. This is because of faulty spark plugs.

Spark plugs should be gapped according to the engine manufacturer’s recommendations. Reattach your spark plug wire while your mower is still being serviced. After the service is completed, you will reattach them.

It is imperative to inspect your spark plugs and clean them if necessary with a brush. The reason for this is that if you don’t change cracked, broken, or burned electrodes, they must be replaced.

The Gravely Zero Turn Air Filter Must Be Replaced

When working in dry or dusty conditions, you should replace your air filter at least once a year. You will need to remove the air filter housing from the air filter.

Use a dry cloth to wipe any dirt remaining in the housing. Keep the air intake free of dirt. You should also replace the housing cover and install a brand-new air filter.

While you should change your air filter annually, you should maintain it during the mowing season. Here are some cleaning instructions for air filters that you can find in my article

Ensure your Gravely zero-turn mower is clean and dry before using

Your mower should be washed with a garden hose to remove debris. Don’t use high pressure when cleaning your sealed bearings with a pressure washer.

Make sure the mower dries completely once you’re done. If you store your mower with wet parts, your mower might prematurely corrode and fail to run.

The most effective way to remove water remaining on your Gravely is to blow air over the mower using a leaf blower. During a sunny day, place your mower in the sun to dry the components and evaporate moisture.

You can also enjoy a light breeze on a day like this. You can learn more about cleaning your mower in this article How to Service a Gravely Zero Turn Lawn Mower.

When the ground is wet, the machine is difficult to operate

Having to operate a zero-turn mower on sloppy or wet ground is very difficult. 

Nevertheless, you might want to consider some precautions before getting stuck: 

• When driving over grass, take it easy and drive at a slow speed.
• Watch for bumpy areas and medium-sized stones.
• You can add some weight to the tires to do a good job.
• It is recommended to keep the tire air pressure at the recommended level.
• The day’s mowing should be avoided if it’s too muddy.

As well as these, make sure you follow the instructions your manufacturer gives. Protecting your head can be part of it. 

Gravel Lawn Mower Problems?

Long enough, you’ll start having problems with your lawn mower starting, not continuing to run, smoking, leaking gas, giving a sloppy cut, vibrating, or an array of other problems.

I’ve put together a guide to help you troubleshoot your Gravely mower when you encounter a problem to save you time and money.

It can be found at Common Gravel Lawn Mower Problems & Solutions.

It’s wise to have a professional complete repairs on your Gravely lawn mower if you aren’t confident doing it yourself.

Taking this precaution will ensure that you and your mower are not injured or damaged further. In most cases, Gravely’s lawn mower dealership or lawn mower repair shop can assist you with your lawn mower issue

 

Conclusion

With Gravely, you’ll find the highest quality features at the best price. Their products are quite popular for their quality. There are always limitations to technical products. You never know when something bad will happen to you. 

It is also pertinent to note that some problems are pretty simple and can be easily resolved. I have discussed a few of them in the article. Contacting the Gravely support team will also be helpful. They have a high response rate