Lawn Mower Clicks But Won’t Start or Turn Over
Clicking without starting or turning over is a sign that the battery cables, terminals, wiring, and corroded terminals are loose; the ground is weak; the starter solenoid is broken; or the charging system or starter motor is defective.
Follow the safety precautions outlined in your mower operator’s manual when dealing with its electrical system. Protecting your eyes and hands includes wearing gloves.
In a riding mower, the starter solenoid is faulty; the battery cables or wiring are damaged or corroded; or the ground wire is faulty or the battery is weak.
When these items are in proper working order but your riding mower still won’t start, you may have a faulty starter motor Lawn Mower Clicks But Won’t Start or Turn Over.
Make sure you disconnect the black negative cable (black) from the battery before performing any electrical repairs. Consult your operator’s manual for safety precautions.
This is Why Your Lawn Mower Clicks But Won’t Start or Turn Over
Lawn Mower Clicks But Won’t Start or Turn Over
You should check the cables and wiring from the battery to the solenoid and from the solenoid to the starter. Make sure they are in proper shape and in proper condition.
To prevent corrosion, make sure the terminals are securely attached. In order for these items to work, they need to be highly conductible and have excellent connections.
By removing corrosion from the wires, you can ensure they are safe. They are safe. It is necessary to replace the cables if they come loose or are damaged. Battery faulty issues and damaged batteries caused by faulty cables Lawn Mower Clicks But Won’t Start or Turn Over.
Ensure the terminals are clean and free of corrosion. Ensure the battery on your mower is in proper working order by disengaging it and cleaning it. It works well to use a wire brush and a baking soda mix consisting of 2 cups of water and 3 heaping tablespoons of baking soda. Whenever there is corrosion on the wiring, it must be repaired or replaced.
An electric component has been added. A damaged or deteriorating terminal needs to be replaced.
Operating principles of the riding mower starting system:
Understanding how this system works will help identify the problem. Often, safety switches make problems appear as if they are engaged. Verify that no safety switches are interfering with your troubleshooting.
- Connect the positive red battery cable to one of the starter solenoid terminal posts (positive).
- Starting the engine is made possible by the black wire attached to the other major terminal on the starter solenoid (negative).
- The red solenoid terminal post is connected directly to the ignition coil at the bottom of the starter solenoid, carrying power to the ignition switch.
- With the key turned to the start position, the white wire provides power to the solenoid coil.
- A coil closes an internal contact, transferring power from the red battery connection to the black wire.
Failure of the internal engine
When a tractor engine fails completely, it’s a catastrophic event. Sometimes, repairing a tractor isn’t economically feasible since installing a brand-new engine (or replacing it completely) is more cost-effective.
Replacement engines can be bought and installed yourself or by professionals if you need to replace the engine. You shouldn’t underestimate the importance of this task. There may be a need for a more modern tractor based on the age and condition of your vehicle.
Usually, a tractor clicks due to a simple issue, rather than a full breakdown of the engine. It’s likely that one of the problems I outlined caused the click.
Failure of the internal engine
When a tractor engine fails completely, it’s a catastrophic event. Sometimes, repairing a tractor isn’t economically feasible since installing a brand-new engine (or replacing it completely) is more cost-effective.
Replacement engines can be bought and installed yourself or by professionals if you need to replace the engine. You shouldn’t underestimate the importance of this task. There may be a need for a more modern tractor based on the age and condition of your vehicle.
Usually, a tractor clicks due to a simple issue, rather than a full breakdown of the engine. It’s likely that one of the problems I outlined caused the click.
In the lawn mower, the starter motor is malfunctioning
Your starter may be to blame if you have checked the battery, cables, wiring, ground, and starter solenoid and found them all in proper working order. There is the option of removing the starter and testing it.
A lawn mower starter can be very expensive. The first thing you should do is have your local dealer confirm whether you have a starter motor problem.
In addition, you can take the starter to a local motor repair shop that specializes in starter and alternator repairs. If necessary, the repair shop’s technicians can test and rebuild the starter.
Batteries that are flat or faulty
If you suspect a battery leak, your first step should be to look for leaks. You should replace it if it leaks. When checking this, be careful since battery acid can be very dangerous.
Provided there is no leak, you can jump-start the battery. You will need jump leads and a 12-volt battery to accomplish this. Occasionally, this will start your tractor, but it won’t solve the entire problem.
You might want to check your battery and alternator. A voltmeter can help you with this. Batteries are not designed to sit idle since they must constantly be charged and discharged.
When a battery has been fully discharged and allowed to sit for a long time, it can’t reenergize.
Conclusion
Several issues can cause a tractor not to start. You might be frustrated, but following these steps will likely help you pinpoint the problem Lawn Mower Clicks But Won’t Start or Turn Over.
- Check out our other troubleshooting guides, including:
- Black smoke and no power are coming from the tractor
- What do you do when your diesel tractor isn’t running smoothly?
- Tractor stalls constantly? Here are seven common causes you should know about
