Why Your Ego Electric Lawn Mower Won’t Start

Want a lawn mower that won’t disturb your neighbor’s baby and won’t contribute to climate change? This article will give you a brief review of some of the most effective emission-free electric lawn mowers on the market and provide you with tips for finding the right one. It may be your first time using an electric lawn mower and you may not know what to expect. For many years, gas-powered mowers were the most common types of mowers that were used on the lawn.

Despite their inexpensive price tag, electric lawn mowers have managed to become a practical option for those who are looking for an environmentally friendly and cost-effective lawn mower. In order to assist you in identifying the problem with the starting mechanism of your Ego battery-powered mower, I will go into more detail about this below. When working with high currents or sharp blades, I urge you to take all necessary safety precautions before doing so.

You should consult with Ego prior to performing repairs on your mower, so that you don’t void the warranty if your mower is still covered under Ego’s warranty period.

Reasons Your Ego electric lawn mower won’t start

Mowers with cords

Identifying the type of mower you have helps us determine what the power issue may be. Assuming that you own a corded lawn mower in this case, let’s figure out what the next step is.

Taking into consideration that today, we’re willing to assume that you haven’t had any difficulties starting and stopping the mower. We’re also inclined to assume that there has been no problem with its power source.

Look for damage

When it comes to corded electric mowers, you are apt to want to be sure that your cord is in proper working condition. This is before you begin using the mower. In most cordless mowers, you will have to supply your own extension cord as the manufacturer usually does not supply one, so you will need to purchase one yourself.

There should be no visible damage or cuts on this cord, and it should be a standard 16-gauge grounded cord. Please check both the male and female ends of the plug for any damage to the prongs. The mower’s male end should also be checked.

Check outlets, breakers

Once you have confirmed that the cord is fine, try putting it into another item from the same outlet if you are confident that it is working. The most likely way to determine what the problem is is to notice that there is no power at the outlet. There may be a loose wire, an outlet that is not working properly, or a tripped breaker that is the culprit. Until the problem is found, check each one.

Switches and breakers should be checked

You may have a problem with the mower itself if there isn’t a problem with the outlet or breaker.

Verify that the mower’s connection is tight and firm at this point.

Once you have reached the breaker on the mower itself, you should proceed to the next step. You can now test the mower to see if the power is working by pressing the RESET button. It would be better if it did, since that would solve your problem. This could indicate that you have a defective motor control switch if it doesn’t do that. Service centers or repair technicians may be able to help you if you don’t understand how to fix or replace this switch.

Deficiency of ego mower batteries

EGO electric lawn mowers cannot start without sufficient battery power. If there is insufficient power in your lawn mower, you may be experiencing problems starting it for a variety of reasons. There will be an impact on both push mowers and Ego zero-turn mowers as a result of this.

Incorrectly installed EGO battery

Your battery installation should be checked before you start using it. As soon as you place the battery, you should make sure that it is secured in place. A click will often be heard when the battery is installed on some EGO lawn mowers when the battery is charged. It is critical to note that when the battery is inserted into the slot, the battery release button will spring up.

Connected to USB port, wall outlet, or battery charger

Battery charge ports can be found on some EGO units, while battery chargers can be found on others. Be sure to plug in all your connections, including outlets and electrical cords.

A standard 120V electrical outlet can be used for this purpose. If you have an EGO cord in your home, you must make sure that the plug style fits the outlet style. Attempting to modify the plug will not lead to a successful outcome.

If you have checked all the connections and you are certain the outlet works correctly, you can proceed. Your extension cord should be capable of charging your mower and not be damaged.

Using an extension cord to connect an electric lawn mower is not a very safe thing to do. This can cause both components to overheat and potentially damage each other, posing a fire hazard.

For this reason, it is recommended that you make sure that whatever cord you use is rated for the electric lawn mower that you will be using. In addition, make sure it has the capability of safely powering the mower.

You have an overheated ego battery

It is possible for the mower to shut down due to excessive heat generated by the Ego battery. In order to restart the battery after it has been damaged, you need to let it cool for a few minutes before trying.

A power tool battery is dead

As opposed than electrically powered lawnmowers, the EGO mower runs on its own batteries, which can be recharged. So, if your lawn mower battery is dead, it is not a surprise that you will be unable to start your mower.

There are some Ego lawn mowers that indicate the level of charge of the battery, whereas others do not have this feature. As a replacement for a display on your mower, your battery charger may have an LED lighting system that indicates the level of charge of your battery. This is if your mower does not have one.

When the battery on your computer or mobile device has run out, you’ll be able to tell when the battery is no longer holding a charge as well as it used to. An indicator that your battery is dying is the fact that you can no longer hold a charge on it. The battery may also become very hot when it is getting older, which may be a sign that something is broken or wrong.

Whenever your battery loses charge, charges slowly, or gets very hot, you should buy a replacement. Older batteries, batteries exposed to extreme temperatures or mechanical failure cause batteries to fail.

A wrongly set up handle on an Ego push mower

The handles of your Ego lawn mower have safety switches that prevent them from starting if they are not set up properly. You must unfold and secure the foldable handle before you use it.

Handles must be retracted to the length of their side rails. These side rails must be locked in place by clamps. Your lawn mower may not start due to a problem with the side rails moving out of position due to the side rails moving out of position.

This may happen to you if you do not secure the clamps. In this case, you will need to loosen the clamps, make sure that the handle is correctly extended, and then tighten them again.

Lawn mower plugs are loose

Especially if you have an electric zero-turn mower, there are many electrical wires running through it. Among all these connections, plug-ins can become loose or disconnected.

You will not be able to start your lawn mower because of this. Check your lawn mower for plug-in connections by opening up the battery and checking around the battery.

Please ensure that the battery has been removed from the Ego electric mower before starting this process. In order to ensure that the plugs you see make a secure connection, you may want to unplug and reconnect the plugs you see. Your lawn mower may only need the tiniest adjustment to get it back on track.

Ego mower wires loose or pinched

The lawn mower’s electrical system consists of a number of wires that are connected to it. In some cases, these wires can become loose or pinched, resulting in a short.

When checking for a short, it is helpful to wiggle the wires. It is also possible to identify a short by using a multimeter.

As a result of pinched wires on the EGO push mowers, you will be unable to start your mower if you use it. The area where the handle is folded into the machine for storage is a common area where wires have been pinched. Therefore, it happens to be a common place for wires to be pinched.

Using a wire nut, you can secure connections that are loose or pinched. If you are planning to perform the repair, then you need to remove the battery before you begin.

Moreover, if you still have a manufacturer warranty, check with Ego if it still covers you. In the event that you try to repair the damaged wire yourself, your warranty may be voided.

Electric mower blades are clogged with debris

There is a high chance that more grass will get stuck in the deck of your Ego lawn mower if there is extra grass or other debris set up.

It is critical to check beneath the deck near the blades of your electric lawn mower, no matter if it has a zero-turn or push style, to ensure that there are no clippings built up beneath the deck that need to be removed. Before you begin to work on the deck, I would like to remind you to remove the battery first.

It is possible that the lawn mower may refuse to start because of a large amount of grass on the deck of the electric lawn mower. This could be the underlying reason why your lawn mower is not starting.

The lawn mower shuts off automatically if there are any problems with the blades on it. Safety features will prevent the lawn mower from turning on if this occurs.

You may also find that your Ego mower does not want to mow when it is overloaded, and may not start at all. You may experience this problem if you attempt to cut too much grass at the same time. This is because the grass is too thick, tall, or wet at the time you cut.

It is recommended to raise your mower’s cutting height if this is the case. You can also slow down your speed when you are experiencing this problem in order to decrease the load on your Ego mower.

The Ego lawnmower has components that are damaged

If Ego mower troubleshooting reaches this point, you may have to shell out more money. Since it also means spending more money, it might be the case that you have to spend more.

While it may not be ideal, the fact remains that you are likely to need to replace certain components on your lawn mower at some point or another. This is over the course of your mower’s lifecycle.

The lawn mower has a number of parts that are required to be maintained on a routine basis in order to keep it working properly. The most simple parts of your lawn mower are usually not very pricey, but once you replace the most critical parts and get the professional assistance that you need to replace the part, it is possible that you might have to spend more than the whole lawn mower is worth.

The only way to ensure that your lawn mower is in proper working order after a storm is to check all of its components. Then, you can make an informed decision as to whether it’s worth fixing based on the damage.

On an electric lawn mower, there are a number of parts that are commonly in need of replacement, including:

• The power cord is one of the most significant components
• Power
• In the blades,
• A safety switch and a plug are both important

Our discussion of most of these components has already been covered. We have also discussed how when these components are damaged or out of place, your lawn mower will not be able to start. In spite of that, we have not mentioned in detail the following two components which are relevant here, which are the start switch and motor of the machine.

You’re better off getting your electric lawn mower serviced by a professional if either of these pieces is damaged and causing your lawn mower not to start.

It is recommended that individuals with extensive mechanical and electrical knowledge handle these components. This is because they are usually expensive and must be handled by individuals with extensive mechanical and electrical knowledge.

Conclusion

There is always the possibility that at some point you will run into a problem with your equipment that runs on electricity or gas. This will require some special attention in terms of troubleshooting. Fortunately, when it comes to electric Ego electric lawn mower won’t start, you don’t have to spend a great deal of time figuring out what the problem may be.

You can simply call for assistance. It is imperative to stay safe, follow the steps, and have patience at all times. The world is a better place because of electricity, but it is not a magical thing.